After 2 years of printing with my FuseBox, I've been working on a successor design. Predictably named the FuseBox2, it takes the low-price and accessibility of the original and makes improvements upon reliability, quality, and speed.
[attachment 96137 IMAG0369.jpg]
Here's an album of the build: http://imgur.com/a/Kdmro
Github repo: [github.com] // Thingiverse page: [www.thingiverse.com]
Key improvements include a much more rigid 2020/2040 frame, vertical gantry for easier hotend removal, improved cooling duct that doesn't focus air on the heater block, and more robust endstop mounts.
Overall I'm pretty happy with the way the printer's turning out. I still need to mount the LCD, PSU, and cord socket as well as do some more fine tuning to the firmware/slicer settings.
[attachment 96137 IMAG0369.jpg]
Here's an album of the build: http://imgur.com/a/Kdmro
Github repo: [github.com] // Thingiverse page: [www.thingiverse.com]
Key improvements include a much more rigid 2020/2040 frame, vertical gantry for easier hotend removal, improved cooling duct that doesn't focus air on the heater block, and more robust endstop mounts.
Overall I'm pretty happy with the way the printer's turning out. I still need to mount the LCD, PSU, and cord socket as well as do some more fine tuning to the firmware/slicer settings.