Hello All!
I've decided to finally post about my 3D printer build I've been working on for over 6 months now. The printer is designed to be a smaller build volume with dual extrusion with a corexy motion system. I decided to embrace the Digital Dentist's design method and use 1/2" tooling plate for most of the frame. Below are the specs on the rest of the printer
![]()
I have a blog were I am detailing the build more at length. Feel free to check it out here: [www.additiveblog.com]
I'll also post updates on here as I can. My goal is to have this finished by the Milwaukee Maker Faire in September so I'll hopefully be moving quickly. After the printer is complete, I will post the CAD file as well. Let me know if you have any questions!
![]()
![]()
![]()
![]()
![]()
![]()
![]()
![]()
![]()
I've decided to finally post about my 3D printer build I've been working on for over 6 months now. The printer is designed to be a smaller build volume with dual extrusion with a corexy motion system. I decided to embrace the Digital Dentist's design method and use 1/2" tooling plate for most of the frame. Below are the specs on the rest of the printer
- Hotend: E3D Chimera
- Extruders: J-Max Belt Bowden Extruder (about 200 mm bowden tube)
- Motion System: THK (9 mm) and Tompson (30 mm) linear guides
- Controller: Replicape
I have a blog were I am detailing the build more at length. Feel free to check it out here: [www.additiveblog.com]
I'll also post updates on here as I can. My goal is to have this finished by the Milwaukee Maker Faire in September so I'll hopefully be moving quickly. After the printer is complete, I will post the CAD file as well. Let me know if you have any questions!
