If the space is not a problem, would you recommend putting a large all-metal cooling fan (10cm or 12cm) at the upper corner of the chamber?
- no extra weight, volume and motor vibration added to the extruder.
- no air tube (bound with wires) goes from top into the carriage.
- keep warm air inside the chamber, not introduce air from outside.
- the air flow should be strong enough but not that even across the whole bed.
style A: blow directly to the bed
[attachment 110523 ScreenShot2019-03-14at12.47.05.png]
style B: blow to the chamber wall and expect the air cycling in the chamber
[attachment 110524 ScreenShot2019-03-14at13.01.30.png]
- no extra weight, volume and motor vibration added to the extruder.
- no air tube (bound with wires) goes from top into the carriage.
- keep warm air inside the chamber, not introduce air from outside.
- the air flow should be strong enough but not that even across the whole bed.
style A: blow directly to the bed
[attachment 110523 ScreenShot2019-03-14at12.47.05.png]
style B: blow to the chamber wall and expect the air cycling in the chamber
[attachment 110524 ScreenShot2019-03-14at13.01.30.png]