CoreXY X axis wobble (no replies)
A while back I noticed the X axis wobbling a bit in my corexy sand table as the magnet carriage moved back and forth on the X axis (Y position fixed). I decided to check my printer, UMMD, to see if it...
View ArticleMy printed circles are oval (2 replies)
Hi guys I have HyperCube and when I try to print circle my printer print oval shape not circle [attachment 120629 circle.jpg] Any idea ?
View ArticleTronXY X5SA 330x330 bed thicker? Impossible to tram with 6 set screws! (2...
Hey all, I still use the TronXY firmware on my X5SA 330x330 CoreXY. I have NEVER been able to tram that bed with 6 set screws. So, I pulled half of them off to be able to get a real plane instead of a...
View ArticleLid for Rat Rig V-Core-3 300 x 300 (no replies)
I've uploaded a cut down version of the 500 x 500 Lid for the 300 x 300 size machine. On Printables [attachment 120708 ScreenShot2023-12-28at8.31.13PM.png]
View ArticleClik here to view.
What is the cause of magical random ripples on the Core XY printer? (6 replies)
Hello Help me please. I have voron trident like printer. My 1st custom assembly. CONFIGURATION • 4040 (v-slot) and 2040 (t-slot) frame with corners and corner outer plates; • RDBB 500mm rails (12mm on...
View ArticleLerdge x y, TMC2208 (no replies)
Bonjour, j'ai une imprimante DIY en Core XY avec une carte lerdge K. Je viens de changer les pilote TMC 2208 des moteurs X et Y et voila mon problème : quand je vais dans le panneau de contrôle des...
View ArticleQIDI X-MAX3 issues after update (no replies)
Hello everyone, this forum was recommended to me and I hope that i hit the right place to throw in my issue. short backstory: My company (IT & software development) got 2 3d printers for a...
View Articlepen plotter A1 size 2020 aluminum frame based (no replies)
hello i want to build A1 sized pen plotter soo badly.. there are lost of best plotters on YouTube but no tutorial or stl fille can anyone help to build A1 size plotter or suggest tutorial link or stl...
View Articlerhino worm gear (5 replies)
I wanted to mount a rhino worm gear to a 20x20 profile and found that the shaft was a bit crooked. It is not parallel to the profile. See the picture, the shaft is off more than 1mm on one side. The...
View Articlecore idex feedback (3 replies)
Hi All, I've was inspired by digital dentist's UMMD build. I used a lot of the design methodology to build a core idex printer. I'm about 85% finished in fusion 360 and wanted some feedback. I'll be...
View Article